Marquis Spas Reward Owner's Manual download pdf (Page 66)

WEEKLY MAINTENANCE

Removing Debris

Remove any debris and leaves from the Vortex skimmers and suction guard(s)

on the inside of the spa. Blocked intakes can impede the flow of water through

the jetting system.

Water Level

Replenish the water level if necessary so that it is approximately two-thirds up the

Vortex skimmer opening. (See STARTING YOUR SPA.) Low and high water levels

can damage your spa. It is important to check your water level often.

MONTHLY MAINTENANCE

Filter Care

We cannot stress enough the importance of a clean filter for proper water

filtration. Dirty filters can restrict water flow, cause hazy water, and prevent your

chemicals from working properly. Dirty filters can also cause low flow from jets,

poor water clarity and sensors to activate error codes. It is important to clean

filters regularly. Many water treatment products clear or clarify the water by

clumping microscopic particles and minerals together so that these larger

particles can be effectively trapped in the filter. A filter clogged with debris and

calcium deposits does not trap particles properly. Soak your filter cartridges in

Filter Cleaner monthly.

The Maintenance Reminder on the spa-side Control Panel indicates a CL every

30 days to remind you to clean your filter.

Removing the Filter

Turn off the spa breaker. Grasp the edge of the Vortex skimmer lid or Waterfall,

pull up firmly, but gently, to remove it.

Turn the filter cartridge counterclockwise to unscrew it from its base. Lift out the

filter cartridge.

Use a hose to clean the filter cartridge and Filter Cleaner to soak the filters.

NOTE: Keep an extra set of filters on hand so you always have a clean set

ready for immediate spa enjoyment. Remember to replace the filter cartridges at

least once a year.

Reinstalling the Filter

Repeat the steps above in reverse. Do not overtighten the filter as it may cause

the threads on the bottom to strip and fail to hold the filter in place. When

replacing the Waterfall, center the top over the raised filter ring and press down

firmly until the top snaps into place. (See INSTALLATION INSTRUCTIONS, Filter

Cartridges.)

CAUTION: Over-tightening of the filter can cause the filter or filter housing to

crack. Tighten filter until it is just snug.

NOTE: Filters and filter lids do not qualify for labor coverage. These parts

can be purchased or exchanged under warranty at your authorized

Marquis Spas

dealer.

MAINTENANCE

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Comments to this Manuals

No comments

Marquis Spas Reward Owner's Manual Page 66

Comments to this Manuals

Related products and manuals for Above ground pool accessories Marquis Spas Reward