Marquis Spas Quest Owner's Manual download pdf (Page 29)

SOAK TIMER

The soak timer starts the first time you press a JETS

pad. The LCD window displays the elapsed time (1-

30) for 55 seconds then switches to the current

water temperature for five seconds then back to the

timer. It continues to alternate for the entire 30

minutes. The timer runs for 30 minutes regardless of

other functions in use (jets, temperature, or light). You

can manually cancel the timer by pressing the

TEMP+- pad and then the LIGHT pad.

CONSTANTCLEAN™ WATER MANAGEMENT

WITH BUILT-IN SANITATION SYSTEM

(See Built-in Sanitation System page 53)

Factory Default Settings:

• Filter Cycle Duration: F2 (2 hours)

• Filter Cycles: 2C (twice per day)

• Smart Logic: 1H (1 hour)

These settings represent the most commonly used

settings, but your use may be different, depending

upon many variables – frequency, number of bathers,

duration, water capacity, etc. These variables affect

the quality of water and the way it should be managed

to achieve the most effective cleansing. Selectable

choices for the settings of the operation systems

allows flexibility and ensures your Marquis spa remains

easy to maintain for your particular set of circumstances.

SOLID-STATE OZONATOR

The ozone generator functions whenever the system

is running on filter or clean up cycles. You should

occasionally inspect your ozonator to ensure it

continues to light (see MAINTENANCE, Every Three to

Four Months).

SMARTCLEAN FILTRATION

Your spa is preset at the factory with a default setting

to filter itself using the jet pump on low-speed for two

hours twice in a 24 hour period. These settings

represent the filter settings necessary for average

use. The timing of the first filter cycle is determined by

when the spa was initially energized. The first cycle

begins six minutes after this initial power-up. The

second filter cycle begins 12 hours after the first cycle.

To adjust the filter settings

Press the SETTING pad to display the filter time

settings (F1, F2, F4, F6). Use the TEMP+- pad to scroll

through the options. When desired selection has

been reached, press the SETTING pad again to enter

selection and advance to the filter cycle settings (2C,

1d, 1n). For example, if you select 2C and F2, your spa

will filter two hours twice a day for a total of four hours

of filtration daily.

PAGE 29

spa control operation

Marquis Ozonator

reduces the need for

chemical sanitizers.

MARQUIS SPAS

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 70 71

Comments to this Manuals

No comments

Marquis Spas Quest Owner's Manual Page 29

Comments to this Manuals

Related products and manuals for Above ground pool accessories Marquis Spas Quest