Marquis Spas Quest Owner's Manual download pdf (Page 46)

SbY:

Standby mode has been activated by pressing a pad

combination on the user panel. Press any pad to leave

Standby Mode and return to normal operation.

Additional Diagnostics for Epic, Reward and

Destiny models:

rtC: Hardware failure. Contact dealer.

PSt: Hardware failure. Contact dealer.

CrC: Firmware install problem. Contact dealer.

CFE: Configuration error, spa cannot start up. Con-

tact dealer.

GFI: Spa could not trip GFCI. Contact dealer, contin-

ued operation could be unsafe.

StU: A pump appears to be stuck on, causing the

water temperature to creep up, possibly to hazard-

ous levels. POWER DOWN SPA IMMEDIATELY. DO

NOT ENTER THE WATER. Contact dealer.

HOt: A pump appears to have been stuck on the last

time spa was powered. POWER DOWN SPA IMMEDI-

ATELY. DO NOT ENTER THE WATER. Contact

dealer.

NOTE: If power is shut off or a power outage occurs

the 240V system has a battery backup. All user

settings are retained.

MAINTENANCE REMINDERS:

The following reminders will be shown on the LED

lights indicating it is time for maintenance. Reminder

messages will also be displayed in the LCD window.

Reset the reminders by pressing the Temp Up, Temp

Down, or Settings pad.

• Check Bromine: rSA will be displayed in the LCD

window every 21 days.

• Clean Filter: LED will illuminate every 30 days.

rCL will be displayed in the LCD window.

• Change Water: LED will illuminate every 90 days.

rCH will be displayed in the LCD window.

• Change Minerals: rCA will be displayed in the LCD

window every 90 days.

troubleshooting

PAGE 46

MARQUIS SPAS

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 70 71

No comments

Marquis Spas Quest Owner's Manual Page 46